College of Technology - Building Unlimited Career Opportunities
Computerized Machining Technology
Books & Supplies
Textbooks may be purchased at the University Bookstore located at the Pond Student Union - Building #14. Textbooks may also be purchased or reserved on-line through www.efollett.com or at the bookstore’s website. Payments may be made with cash, check, VISA, MasterCard, American Express, or Discover. A shipping charge will be added for mail orders. See the bookstore’s website for more information on purchasing or reserving books or for refund policy information. Save Your Receipts!
Note: Prices are subject to change at anytime without prior notification. Textbooks are subject to change each semester.
| Description | Approximate Price | |
|---|---|---|
| MACH 0111 Engine Lathe Theory I | ||
| Machinery’s Handbook | ISBN 0831128005 | $95.00 |
| Machine Tool Practices | ISBN 0135015081 | $137.00 |
| MACH 0112 Machine Math I | ||
| Mathematics for Machine Technology | ISBN 1428336567 | $137.00 |
| MACH 0123 Interpreting Blueprints | ||
| Print Reading for Industry | ISBN 1605253081 | $75.00 |
| MACH 0261 CNC Introduction to Theory | ||
| CNC Programming Handbook (W/CD) | ISBN 0831133473 | $75.00 |
| Calculator – TI-36X or equivalent | $18.00 | |
| Safety Shoes (Steel Toe required) | $30.00 | |
| Approximate Total Books and Supplies | $567.00 | |
Do not purchase tools until after the first day of class. Vendors will be available in the program.
| Quantity | Description | Approximate Price |
|---|---|---|
| 1 pair | Safety Glasses with side shields OSHA approved, non-prescription | $10.00 |
| 1 | 6" X 3/4" Scale in Fractions, 32nds 64ths, 50ths, and 100ths | $8.00 |
| 6 | High speed steel with 5% cobalt lathe bits 3/8" x 3/8" | $25.00 |
| 1 | 6 inch caliper - digital or dial type | $85.00 |
| 1 | 2 inch paint brush | $1.00 |
| 1 | Dial indicator - 1" minimum travel | $20.00 |
| 1 | Dial test indicator with attachments | $125.00 |
| 1 | 10 inch smooth cut file | $10.00 |
| 1 set | 25 piece radius gauge set | $52.00 |
| 1 | Thread center gauge - 60 degree standard | $8.00 |
| 2 | Grease pencils | $1.00 |
| 1 | 20 oz. Dead Blow Hammer | $25.00 |
| 1 | Magnetic indicator base with attachments | $30.00 |
| 1 | Micrometer - 0-1" (Vernier Reading to 4th decimal place) | $110.00 |
| 1 | Micrometer - 1-2" (Vernier Reading to 4th decimal place) | $125.00 |
| 1 | Micrometer - 2-3" (Vernier Reading to 4th decimal place) | $170.00 |
| 1 | Depth Micrometer - 0-6" | $240.00 |
| 1 | # 3 Center Drill | $5.00 |
| 1 | #4 Center Drill | $8.00 |
| 1 | 6 inch triangular taper file | $7.50 |
| 1 set | 6 piece adjustable parallels | $160.00 |
| 1 | 6 inch pliers | $8.00 |
| 1 set | Screwdrivers - Regular and Phillips | $9.00 |
| 1 | Scriber | $6.00 |
| 1 | EZE - Lap Diamond Stone | $8.00 |
| 1 | Tape measure | $8.00 |
| 1 set | Thread wires | $21.00 |
| 1 | Mighty Mag Way Magnetic Base | $15.00 |
| 1 | Wrench, Adjustable - 12" | $15.00 |
| 1 | Telescoping Gauge – 4 piece set | $100.00 |
| 1 | Mighty-Mag (way magnetic base) | $16.00 |
| 1 | Wrench, Hex Key - 1/32" to 3/8" | $9.00 |
| 1 | Wrench, Hex Key Metric 2-8 | $8.00 |
| Approximate Total Tools Needed for First Session | $ 1,448.50 |
| Quantity | Description | Approximate Price |
|---|---|---|
| 1 pair | Tool Box - Top Box | $250.00 |
| 1 | Cabinet - Roller | $425.00 |
| 2 each | Clamps, cantilever (1 inch, 2 inch and 3 inch) | $25.00 |
| 1 set | Swiss pattern files | $12.00 |
| 1 | 10 oz. Ball Pein Hammer | $15.00 |
| 1 | Half round indicator clamp holder | $35.00 |
| 1 | Sharpening Stone (Arkansas Hard) - Approximately 4" x ½" x ½" square | $5.00 |
| 1 | Sharpening Stone (Arkansas Medium) - Approximately 4" x ½" diameter round | $8.00 |
| 1 | Tap guide | $10.00 |
| 1 | Square Combination Set (4 piece set) | $200.00 |
| 1 | Wrench, Box end - 3/4" | $8.00 |
| Approximate Total Tools Needed for Second Session | $ 1,165.00 |
| Description | Approximate Price |
|---|---|
| Class fees* for MACH 0110, 0120, 0130, 0140, 0250, 0260, 0270, 0290 (50.00 each) |
$400.00 |
| Graduation Application fee for first Certificate/Degree | $20.00 |
| Optional fee for any additional Certificate/Degree | ($10.00) |
| Approximate Total Other Expenses |
$3,600.50 |
*Class Fees will be used to pay for required assessment testing for students, and for MasterCAM software license, computer paper, ink cartridges, metal, and equipment.
Approximate Total Books & Tools - Machining Technology $3,600.50
Anticipate additional expenses associated with this program:
Textbooks associated with academic courses,
Transportation, parking, child care, housing.
You must check your class schedule to determine textbooks required by instructor
