Length of Program: 11 months
Program Coordinator and Instructor: Sweat
A Technical Certificate and an Associate of Applied Science degree (see Business Technology) are available.
Technical Certificate
Prerequisites: (Waived if scores on CPT indicate competence)
| CBET 100 | Technical General Ed |
16 cr
|
| CBET 140 | Mechanical Devices/Adjustments & Procedures |
4 cr
|
| CBET 141 | Operating Systems/Installation & Configuration |
4 cr
|
| CBET 143 | Customer Relations |
2 cr
|
| CBET 147 | Basic Computer Servicing |
6 cr
|
| CBET 149 | Electronic Concepts |
4 cr
|
| TGE 151 | Applied Technical Writing I |
2 cr
|
| CBET 152 | Digital/Laser/Display Systems |
3 cr
|
| CBET 154 | Electronic Cash Registers/Calculators |
5 cr
|
| CBET 156 | Bond Copiers/Imaging Systems |
6 cr
|
| TGE 158 | Applied Job Search |
2 cr
|
| CBET 162 | Product Sales |
1 cr
|
| CBET 164 | System Integration/PC Network |
7 cr
|
|
TOTAL: 62 cr
|
The courses listed above will be taught in sequential blocks of instruction. Successful completion of a course is required before the student can progress in the program. If the student fails any math, theory, or lab course, then that course must be repeated and a passing grade obtained before the student can advance in the program. The student must exit the program and make up the deficiency through Technical General Education or other appropriate methods. The student will then be allowed to repeat the course at the next available program opening.
Courses
Students who demonstrate adequate academic skill to succeed in the occupational content courses of the program will be given an "S" grade for CBET 100 and will not be required to attend the initial session.
Based on your keyboarding skills, you may be required to take a 1 credit keyboarding class in order to meet the competencies of the program.
CBET 100 Technical General Education (variable) 1-16 credits. The basic mathematical skills of fractions, decimals, percents, proportions are reviewed. Also, for technical fields, beginning algebra through the application of the quadratic equation is studied. An experiment-based science class that emphasizes development and application of equations and problem-solving techniques is taught. Communication skills, critical thinking and basic technical writing are stressed.
CBET 140 Mechanical Devices/Adjustments and Procedures 4 credits. Use the typewriter as a training device. Disassembly and assembly of all components of a single element machine and theory of the electrical parts, their functions and adjustments will be taught. Troubleshooting, repair, and overhaul of typewriters will be performed. Instruction in hand tools, power tools, mechanical parts and lubrication of parts will occur. Lecture/laboratory.
CBET 141 Operating Systems/ Installation and Configuration 4 credits. Prepares the student with keyboarding skills, operating systems, their commands and functions. Basic word processing, DOS commands, Windows, Windows 95, commands, basic software installation and computer terms will be covered. Lecture/laboratory.
CBET 143 Customer Relations 2 credits. Prepares the student to meet the public and communicate orally. Introduces significance of maintenance agreements, telephone etiquette, dress standards, personal hygiene, work standards and human relations. Lecture.
CBET 147 Basic Computer Servicing 6 credits. Introduces the student to servicing of computers. Includes training in disk drives, power supplies, modems, printers, keyboards, monitors and hookups. Diagnostic troubleshooting methods and utility programs are explored. Lecture/laboratory.
CBET 149 Electronic Concepts 4 credits. Student is introduced to basic electricity and electronics. Simple DC circuits, use of a Volt-Ohmmeter, soldering, resistors, capacitors, conductors, insulators, Ohm's law, Diodes, transistors, and motors will be covered. Includes math applications covering positive and negative numbers related to basic electronics. Decimals, metrics and algebra formulas are covered.
CBET 152 Digital/Laser/Display Systems 3 credits. Electronic terms and schematics will be utilized. Logic gates and basic digital electronics will be explored. Digital Binary formulas will be discussed. Laser concepts and fiber optics will be covered. Lecture/laboratory.
CBET 154 Electronic Cash Register/Calculator 5 credits. The theoretical operation of electronic calculators and electronic cash registers will be discussed. Demonstrate disassembly, reassembly, adjustments and checkout procedures. Perform setup programming, troubleshooting, safety and hookup of cash registers to computer networks such as scanners and scales. Lecture/laboratory.
CBET 156 Bond Copiers/Imaging Systems 6 credits. Operate bond copiers, laser and digital printers. Hookups, theory of electronics, basics of xerography, supplies, disassembly, assembly, troubleshooting, adjustments, cleaning methods and safety will be covered. Fax machine operation and servicing are covered. Lecture/laboratory.
CBET 158 Customer Relations Practicum 2 credits. The student will work for other people by going and performing service work on controlled basis.
CBET 162 Product Sales 1 credits. Prepares the student with an introduction to sales techniques, selling office equipment, percentage marks ups, discounts and invoices. How sales are an important part of business systems/computer technology and retail sales. The term effort is important.
CBET 164 System Integration/PC Network 7 credits. Advanced diagnostic troubleshooting methods, network application, hookups, hub and computer applications will be studied. Lecture/laboratory.
CBET 199 Special Topics (variable) 1-8 credits. Addresses the specific needs of individuals who may be part-time, to upgrade their technical skills through units of instruction that are currently available through the program's full-time pre-employment curriculum. Permission of the instructor is required.
TGE 151 Applied Technical Writing 2 credits. Course provides instruction in informal technical report writing and business correspondence. Includes grammar/punctuation review, introduction to word processing and technical terminology/vocabulary building. Meets general education requirement for A.A.S. degree.
TGE 158 Applied Job Search 2 credits. Course provides techniques and development of employment process skills. Includes instruction in resume/cover letter writing, interviewing, company research, and portfolio preparation. Meets general education requirement for the A.A.S. degree.
TGE 162 Keyboarding 1 credit. Enables the development of basic touch keyboarding skill in a minimum of time. Completion should prepare students to (a) input alphabetic, numeric, and symbol information quickly and accurately and (b) understand basic vocabulary and concepts used in keyboarding operations when entering and retrieving information.
IDAHO
STATE UNIVERSITY