One Associate of Applied Science Degree, one Associate of Technology degree and one Bachelor of Applied Technology degree are available to the student in Civil Engineering Technology.
The following courses are required for an Associate of Applied
Science degree:
CIVT 100 Technical General Edu I 8 cr
CIVT 101 Technical General Edu II 8 cr
CIVT 121 Mathematics I 6 cr
CIVT 122 Mathematics II 3 cr
CIVT 123 Drawing Laboratory I 4 cr
CIVT 124 Drawing Laboratory II 4 cr
CIVT 125 Surveying I 4 cr
CIVT 126 Surveying II 5 cr
CIVT 130 Materials Testing and
Specifications I 2 cr
CIVT 241 General Physics 4 cr
CIVT 242 Engineering Mechanics 4 cr
CIVT 243 Materials Testing and
Specifications II 4 cr
CIVT 244 Materials Testing and
Specifications III 3 cr
CIVT 245 Route Survey and Design 10 cr
CIVT 246 Land and Construction Surveys 7 cr
TGE 151 Applied Technical Writing I 2 cr
TGE 152 Applied Technical Writing II 2 cr
TGE 153 Applied Technical Speaking 2 cr
TGE 156 Applied Business Principles 2 cr
TGE 158 Applied Job Search 2 cr
TGE 160 Applied Human Relations 2 cr
TOTAL: 88 cr
The courses listed above will be taught in sequential blocks of instruction. Successful completion of a courses is required before the student can progress in the program. If the student fails any math, theory, or lab course, then that course must be repeated and a passing grade obtained before the student can advance in the program. The student must exit the program and make up the deficiency through Technical General Education or other appropriate methods. The student will then be allowed to repeat the course at the next available program opening.
Courses
Students who demonstrate adequate academic skill to succeed in
the occupational content courses of the program will be given an
"S" grade for CIVT 100, 101 and will not be required to attend
the initial session.
Based on your keyboarding skills, you may be required to take a 1 credit keyboarding class in order to meet the competencies of the program.
CIVT 100 Technical General Education I 1-8 credits. A review of the mathematical skills of fractions, decimals, percents, proportions, and beginning algebra. A review of oral and written communications.
CIVT 101 Technical General Education II 1-8 credits. A continuation of Technical General Education I. An in-depth review of introductory algebra consisting of signed numbers, equations, polynomials, graphing and systems of equations. Also emphasized are communication skills, problem solving, and prep for technical writing. An experiment based science class is taught that emphasizes development of, and application of equations and problem solving techniques. The scientific calculator is emphasized in this science class.
CIVT 121 Mathematics I 6 credits. A basic study of technical mathematics including numbers and order of operations, algebra, functions, trigonometry, factoring, rational expressions, equations, quadratic equations and functions, higher degree equations, inequalities and analytic geometry. The use of the scientific calculator will be emphasized and math will be applied to practical laboratory and field work when possible.
CIVT 122 Mathematics II 3 credits. A continuation of CIVT 121 Mathematics I studying vectors and oblique triangle trigonometry, graphing of trigonometric functions, exponents and radicals, exponential functions, sequences and series, systems of equations, and statistics. Emphasis will be on placed in areas relating to Civil Engineering Technology when possible. PREREQ: CIVT 121.
CIVT 123 Drawing Laboratory I 4 credits. Introduction and use of drafting equipment. Alphabet of lines, multiview projection, sectional views, auxiliary views, dimensioning, and working drawings. Basic ACAD is taught and some drawing is made by computer aided design. Taught the second eight weeks of the first semester.
CIVT 124 Drawing Laboratory II 4 credits. Civil Engineering drafting, municipal and rural maps and drawings, drainage applications, plan and profile drawings, cross-sections, earthworks and other details relating to Civil Engineering Technology drawings. ACAD is used for some of the drawings.
CIVT 125 Surveying I 4 credits. Introduction and field use of surveying equipment. Theory and use of transit, theodolite, level, chaining or taping, hand levels and rodding. Field projects: simple traverse, chaining (land measurement), differential leveling, profile leveling, and applications to basic trigonometry in surveying. Taught the first eight weeks of the first semester.
CIVT 126 Surveying II 5 credits. Continuation of Surveying I. Survey of land, traverses and closures, bearings, and coordinates. Solar observation for land measurement control, topography surveying and maps. Use of calculators to solve surveying problems. Introduction and use of the electronic distance measuring theodolites. Application of mathematics and survey drawing emphasized.
CIVT 130 Materials Testing and Specifications 2 credits. Introduction to basic lab equipment, test procedures, and specifications. Learn tests used for soils classification in preparation for soils survey accomplished in the second year of the program.
CIVT 241 General Physics 4 credits. General study in applied physics including practical problems. Units of measurement and the metric system, linear and rotational motions, and principle of simple machines. The system of forces, structure of matter, work energy and power, vector and graphic solutions, heat transfer, and basic electrical concepts.
CIVT 242 Engineering Mechanics 4 credits. Non-calculus course relating to the principles of plane statics and dynamics and their application to engineering problems. Includes such topics as force systems, equilibrium conditions, force analysis of structures, friction, fluid statics, kinematics, and kinetics to plane motion. Computation of bending and shear forces and design of structural beams.
CIVT 243 Materials Testing and Specifications II 4 credits. Introduction to soils theory, soils types, soils classification and terminology. Do actual soils survey in conjunction with route survey and design, culminating with an Autocad soils survey/profile drawing. Theory and practical application of compaction of soils and asphalt with related specifications. Nuclear dens-o-meter theory and training. Anticipated field trips to conduct compaction tests at actual construction sites. Asphalt theory and design.
CIVT 244 Materials Testing and Specifications III 3 credits. Concrete theory, testing and design, inspection practices and specifications. Anticipated field trips to conduct tests at actual construction sites. Introduction to steel theory and usage. Introduction to plan reading.
CIVT 245 Route Survey and Design 10 credits. Study of route surveying. Circular, spiral, and parabolic curves as applied to highway design. Route locations, preliminary investigations, topographic maps, contours, design, detail maps, planes, and specifications. The student will perform both field and lab work to accomplish total results. The student also will learn resections, Idaho state plane coordinates and radial surveying. All computations will be made by the use of a programmable calculator and a minicomputer. Maps will be drawn with plotters using computer aided drafting (CAD) and survey software.
CIVT 246 Land and Construction Surveys 7 credits. Advanced study including construction stakeout, and surveys of public lands. Students will perform design/drafting of a road project and global positioning systems (GPS). Includes special problems in surveying and the use of a personal computer and computer aided drafting (CAD). The student will develop a road project report, covering field and design activities and design drawings. Principles of construction, quality management and construction scheduling of projects.
CIVT 299 Special Topics (variable) 1-8 credits. Addresses the specific needs of individuals, enabling the students to upgrade their technical skills through part-time enrollment in units of instruction that are currently available through the program's full-time pre-employment curriculum. Permission of the instructor is required.
TGE 151 Applied Technical Writing I 2 credits. Course provides instruction in informal technical report writing and business correspondence. Includes grammar/punctuation review, introduction to word processing and technical terminology/vocabulary building. Meets general education requirement for A.A.S. degree.
TGE 152 Technical Writing II 2 credits. Course provides instruction in techniques and application of formal technical report writing and fundamentals of research and development. Meets general education requirement for the A.A.S. degree.
TGE 153 Applied Technical Speaking 2 credits. Course provides principles of technical and business speech communication. Includes informative and persuasive presentations, effective meeting organization and listening skill development. Meets general education requirement for the A.A.S. degree.
TGE 156 Applied Business Economics 2 credits. The course provides students with an overview of economic principles related to technical courses of study.
TGE 158 Applied Job Search 2 credits. Course provides techniques and development of employment process skills. Includes instruction in r‚sum‚/cover letter writing, interviewing, company research, and portfolio preparation. Meets general education requirement for the A.A.S degree.
TGE 160 Applied Human Relations 2 credits. Course provides a study of human behavior in an occupational environment with emphasis on communications, motivation, leadership and personal attitude. Meets general education requirement for the A.A.S. degree.
TGE 162 Keyboarding 1 credit. The course enables the development of basic touch keyboarding skill in a minimum of time. Completion should prepare students to (a) input alphabetic, numeric, and symbol information quickly and accurately and (b) understand basic vocabulary and concepts used in keyboarding operations when entering and retrieving information.
IDAHO
STATE
UNIVERSITY