Electro-mechanical Technology

4½ Semester Program

Program Coordinator and Instructor: Green

Instructors: Fitzen, Georgeson, Hudman, McQuery, Norton, Womack

One Associate of Applied Science Degree, and one Bachelor of Applied Technology degree in Electromechanical Technology are available. All theory classes and laboratory application classes of these theories require concurrent enrollment.

Selection of the Electronics option for each accepted student in the Electronic Core curriculum will occur in the second semester. Acceptance into particular options is based upon available openings and other factors such as a grade point average and attendance.

Associate of Applied Science Degree in Electromechanical Technology

(4½ Semesters)

Required courses:

ELTR 100     Technical General Education     1-16 cr
ELTR 141     Applied Mathematics I              4 cr
ELTR 142     Applied Mathematics II             4 cr
ELTR 143     Electronic Theory                  5 cr
ELTR 144     Electron Control Devices Theory A  5 cr
ELTR 145     Electronic Laboratory              5 cr
ELTR 146     Electron Control Devices
             Laboratory A                       5 cr
ELTR 147     Applied Science                    4 cr
ELTR 161     Digital/Microprocessor
             Systems Theory                     5 cr
ELTR 162     Digital/Microprocessor
             Systems Application                5 cr
ELTR 269     Electronic Drafting I              2 cr
ELMT 263     EM Digital Devices and 
             Systems Theory                     6 cr
ELMT 264     EM Digital Devices and
             Systems Laboratory                 6 cr
ELMT 271     EM Analog Devices and
             Systems Theory                     6 cr
ELMT 272     EM Analog Devices and
             Systems Laboratory                 6 cr
ELMT 290     Internship                       1-8 cr
TGE 153      Applied Technical Speaking         2 cr
TGE 154      English Composition for Technology 4 cr
TGE 156      Applied Business Principals        2 cr
TGE 158      Applied Job Search                 2 cr
TGE 160      Applied Human Relations            2 cr
                                        TOTAL: 96 cr

The courses listed above will be taught in sequential blocks of instruction. Successful completion of a course is required before the student can progress in the program. If the student fails any math, theory, or lab course, then that course must be repeated and a passing grade obtained before the student can advance in the program. The student must exit the program and make up their deficiency through Technical General Education or other appropriate methods. The student will then be allowed to repeat the course at the next available program opening.

Courses

Official articulation agreements have been established with other Idaho post-secondary and secondary schools. Where these agreements exist, the specific block of training (i.e., session/semester/year) will be accepted as equivalent to that at ISU and will count equally toward graduation.

Students who demonstrate adequate academic skill to succeed in the occupational content courses of the program will be given an "S" grade for ELTR 100 and will not be required to attend the initial semester.

Based on your keyboarding skills, you may be required to take a 1 credit Keyboarding class in order to meet the competencies of the program.

Technical General Education Elective

TGE 140 First Year Seminar 1 credit. This course provides an introduction to the nature of postsecondary education and a general orientation to the functions and resources at Idaho State University. This course is designed to help first-year and transfer students adjust to the University, develop a better understanding of the learning process, and acquire essential survival skills. The course utilizes presenters from various campus support systems, collaborative learning activities, and written assignments which involve student resources and activities on campus. The course also provides a support group of students in a critical transition year by examining problems common to first-year experience. It covers University resources, learning strategies, study techniques, test anxiety, time management, test preparation, and problem solving.

ELTR 100 Technical General Education (variable) 1-16 credits. The basic mathematical skills of fractions, decimals, percents, proportions are reviewed. Also, for technical fields, beginning algebra through the application of the quadratic equation is studied. An experiment-based science class that emphasizes development and application of equations and problem-solving techniques is taught. Communication skills, critical thinking and basic technical writing are stressed.

ELTR 109 Electronic Terminology 1 credit. The study of basic electronic theory vocabulary. This course is to be taken in conjunction with ENGL 101, the first eight weeks of the semester. It is designed for those students who will opt to pursue a Bachelor of Applied Technology degree after earning an Associate of Applied Science degree.

ELTR 110 Electronic Terminology II 1 credit. The study of basic electronic theory vocabulary. This course is to be taken in conjunction with ENGL 101, the second eight weeks of the semester. It is designed for those students who will opt to pursue a Bachelor of Applied Technology degree after earning an Associate of Applied Science degree.

ELTR 140 Directed Study AC-DC/LCR 8 credits. Condensed coverage of basic electronics theory and laboratory and associated mathematics. Accelerated equivalent of ELTR 141, ELTR 143, ELTR 145. For those who have prior knowledge of basic electronics.

ELTR 141 Applied Mathematics I 4 credits. Basic math as it applies to Electrical Theory, ELTR 143; includes algebraic and trigonometric topics as they relate to DC and AC (sine wave) circuit analysis.

ELTR 142 Applied Mathematics II 4 credits. Continuation of ELTR 141. Selected algebraic and trigonometric topics as related to DC and AC (sine wave) circuit analysis with special emphasis on trigonometric solution and vector analysis.

ELTR 143 Electronic Theory 5 credits. Basic electrical fundamentals, direct and alternating current circuits, LCR networks, electrical circuit components, meter circuits and test equipment.

ELTR 144 Electron Control Devices Theory A 5 credits. Comprehensive study and practical application of semiconductors, power supplies, transistor amplifiers, oscillators, operational amplifiers and test equipment.

ELTR 145 Electronic Laboratory 5 credits. Experiments involving subjects covered in ELTR 143. Student will construct experimental circuits upon which tests and measurements will be made to attain specified objectives.

ELTR 146 Electron Control Devices Laboratory A 5 credits. Practical applications of the topics covered in ELTR 144.

ELTR 147 Applied Science 4 credits. Study of matter and energy relationships pertaining to motion, mechanics, heat, light, sound electricity and magnetism and atomic energy. PREREQ: ELTR 141 or Equivalent. This class will be substituted by PHYS 100.

ELTR 161 Digital/Microprocessor Systems Theory 5 credits. A basic study of electronic logic devices and circuits. Includes a study of Boolean Algebra, basic logic gates, combinational logic circuits, digital registers and counters and basic timing circuitry. An introduction to the basic architecture of the INTEL 8085 (8-bit) microprocessor. A brief introduction to assembly language programming.

ELTR 162 Digital/Microprocessor Systems Application 5 credits. This is a practical application of the theory class. Individual labs provide experience with basic logic gates, their configuration and troubleshooting techniques. Microprocessor labs are centered around the INTEL SDK-85 Microprocessor board. Recognition of key processor signals from a troubleshooting perspective is emphasized.

ELTR 269 Electronic Drafting I 2 credits. Drawing fundamentals, orthographic and isometric drawings, and development of basic wire drawings.

ELMT 263 EM Digital Devices and Systems Theory 6 credits. A course of study on the theory, application troubleshooting techniques of solid-state devices used in logic-controlled systems. These principles are applicable to microprocessors and industrial measurement/control processes. This will include: computers peripheral devices, interfacing, Robotic Arms, machine language, and A-D/D-A conversion methods.

ELMT 264 EM Digital Devices and Systems Laboratory 6 credits. A hands-on experience in the application and troubleshooting of the devices, circuits, and systems studied in ELMT 263. Student projects will be given and will include at least the following areas: research, prototyping, operating unit, with oral presentations and written documentation. Results of circuit and system testing and troubleshooting will be maintained in written log form.

ELMT 271 EM Analog Devices and Systems Theory 6 credits. An integrated study of electronics and electromechanical devices and their interrelationships in complex automated systems. Topics discussed will be: semiconductor devices, transducers, electromagnetic devices, mechanical devices and systems such as control, servo, robotic and electromechanical.

ELMT 272 EM Analog Devices and Systems Laboratory 6 credits. This is a practical application of the theory class, ELMT 271. Assignments in lab will cover the electronic and/or mechanical adjustment, calibration, troubleshooting and repair of automated systems. Each student will prototype and analyze components, sub-systems and complete automated electromechanical systems. All results of experiments will be recorded in written log form in the student's log notebook.

ELMT 290 Internship 1-8 credits. On-the-job placement providing work experience for students pursuing careers in Electromechanical Technology. Permission of the instructor is required.

ELMT 299 Special Topics 1-8 credits. This course is designed to address the specific needs of individuals, enabling students to upgrade their technical skills through part-time enrollment in units of instruction that are currently available through the program's full-time pre-employment curriculum. Permission of the instructor is required.

TGE 153 Applied Technical Speaking 2 credits. Course provides principles of technical and business speech communication. Includes informative and persuasive presentations, effective meeting organization and listening skill development. Meets general education requirement for the A.A.S. degree.

TGE 154 English Composition for Technology 4 credits. This is a basic composition course in which students develop skills in understanding and writing paragraphs and essays. Meets general education requirements for A.A.S. degree.

TGE 156 Applied Business Principles 2 credits. The course provides students with an overview of business/economic principles related to technical courses of study. Meets general education requirement for A.A.S. degree.

TGE 158 Applied Job Search 2 credits. Course provides techniques and development of employment process skills. Includes instruction in resumé/cover letter writing, interviewing, company research, and portfolio preparation. Meets general education requirement for the A.A.S. degree.

IDAHO STATE UNIVERSITY  Academic Information  Contact: webmaster@isu.edu  Revised: February 2000