Building Construction Technology

(4 Semesters)

One Advanced Technical Certificate, one Associate of Applied Science degree and one Bachelor of Applied Science degree are available to the student.

Objective:  To prepare graduates for careers in the building construction industry with emphasis on framing, concrete, tile, finish work, cabinets, estimating, blueprint reading, and safety within a curriculum that transfers, directing students towards successful attainment of journeyman status.

Program Coordinator and Instructor: Callaghan

Instructor: Maag

For a Program Information Packet, use this link, which leads to descriptions of each program in general, course descriptions, lists of course sequences, and the cost of books, tools, uniforms, fees, and other expenses.  The URL is  http://www.isu.edu/ctech/programs.shtml 

This program requires students to achieve certain grades in order to advance each semester. Specific information is available in the program’s student handbook.

Advanced Technical Certificate in Building Construction

(4 Semesters)

Required Courses:


BCT 110		Hand Tools, Power Hand Tools,
		  and Power Tools			2 cr
BCT 112		Construction Blueprint Reading I	3 cr
BCT 115		Introduction to Masonry			2 cr
BCT 116		Floor and Wall Construction		4 cr
BCT 117		Introduction to Stairway Construction	2 cr
BCT 118		Roof Framing Construction		4 cr
BCT 120		Trim Carpentry Techniques		4 cr
BCT 121		Basic Cabinetmaking			5 cr
BCT 142		Construction Blueprint Reading II	2 cr
BCT 160		Construction Mathematics		2 cr
BCT 161		Planning and Estimating			2 cr
BCT 201		Concrete (Forming, Pouring 
		  and Finishing)			3 cr
BCT 202		Floor and Sills				2 cr
BCT 203		Interior Wall and Ceiling		2 cr
BCT 204		Roof Rafters and Sheathing		3 cr
BCT 205		Special Framing (Stairways)		2 cr
BCT 206		Field Construction Methods		2 cr
BCT 210		Cornices and Gable Ends			2 cr
BCT 211		Roofing					2 cr
BCT 212		Exterior Walls and Trim			2 cr
BCT 213		Exterior Doors and Windows		2 cr
BCT 214		Insulation				1 cr
BCT 215		Drywall					2 cr
BCT 216		Interior Doors and Trim			3 cr
BCT 217		Flooring				1 cr
BCT 218		Steel Stud Framing			2 cr
						TOTAL: 62 cr

Associate of Applied Science Degree: Building Construction

(4 Semesters)

See A.A.S. Degree General Education Requirements linked here (minimum 15 credits)

Required Courses:

BCT 110		Hand Tools, Power Hand Tools, 
		and Power Tools				2 cr
BCT 112		Construction Blueprint Reading I	3 cr
BCT 116		Floor and Wall Construction		4 cr
BCT 117		Introduction to Stairway Construction	2 cr
BCT 118		Roof Framing Construction		4 cr
BCT 119		Layout and Concrete Framing		2 cr
BCT 120		Trim Carpentry Techniques		4 cr
BCT 121		Basic Cabinetmaking			5 cr
BCT 142		Construction Blueprint Reading II	2 cr
BCT 160		Construction Mathematics		2 cr
BCT 161		Planning and Estimating			2 cr
BCT 201		Concrete (Forming, Pouring 
		  and Finishing)			3 cr
BCT 202		Floor and Sills				2 cr
BCT 203		Interior Wall and Ceilings		2 cr
BCT 204		Roof_Rafters and Sheathing		3 cr
BCT 206		Field Construction Methods		2 cr
BCT 210		Cornices and Gable Ends			2 cr
BCT 211		Roofing 2 cr
BCT 212		Exterior Walls and Trim			2 cr
BCT 213		Exterior Doors and Windows		2 cr
BCT 214		Insulation				1 cr
BCT 215		Drywal					2 cr
BCT 216		Interior Doors and Trim			3 cr
BCT 217		Flooring				1 cr
BCT 218		Steel Stud Framing			2 cr
COMM 1101	Principles of Speech			3 cr
(contributes to AAS English/Communication
Requirement; satisfies a General Education requirement)
ENGL 1101	English Composition			3 cr
(contributes to AAS English/Communication requirement)

						Total: 76 cr

Courses

BCT 110 Hand Tools, Power Hand Tools, and Power Tools 2 credits. Students will learn to properly use and maintain the tools used in the construction trade. F

BCT 112 Construction Blueprint Reading I 3 credits. Students will learn to read a set of blueprints and list materials. F

BCT 115 Introduction to Masonry 2 credits. A review of masonry principles and how different materials are used in the building industry. Emphasis will be placed on the selection and use of various masonry products along with practical applications thereof. Students will use cement block, brick, pavers, and other masonry products in simulated building applications. F

BCT 116 Floor and Wall Construction 4 credits. Students will learn the different parts of a frame wall and roof, the methods for layout, the methods of assembly and erection, and how to estimate the materials and labor needed to complete the building of walls and roof framing. S

BCT 117 Introduction To Stairway Construction 2 credits. The student will build different stairway layouts and find solutions to stairway problems. S

BCT 118 Roof Framing Construction 4 credits. Students will frame up a gable roof, a gable roof with a dormer, a hip roof, and a gambrel roof, and will lay out a truss. S

BCT 120 Trim Carpentry Techniques 4 credits. Students will learn to build and install base molding, door and window casing, crown molding, chair rails, and wall molding. F

BCT 121 Basic Cabinetmaking 5 credits. Identify proper wood or plywood used in cabinetmaking; identify and cut a variety of woodworking joints; and layout, cut and assemble materials for case construction. F

BCT 142 Construction Blueprint Reading II 2 credits. An advanced blueprint reading course that utilizes residential drawings and light commercial plans. Emphasis placed on materials, symbols, specifications, framing systems, floors, plumbing, HVAC, and electrical. PREREQ: BCT 112. S

BCT 160 Construction Mathematics 2 credits. Students will learn the use of various measuring systems of construction and emphasis will be placed on the math used in the building construction trade. F

BCT 161 Planning and Estimating 2 credits. In this class the student will learn how to estimate the amount of material it will take to build a house and plan the sequence of construction. S

BCT 201 Concrete Forming, Pouring and Finishing 3 credits. An introduction to concrete foundations used in residential structures. Students will learn methods to pour, reinforce, and estimate concrete volume. Modern architectural design is increasingly using concrete footings and foundations. Students will learn the use of form, ties, and clamps to pour footings and foundations. F

BCT 202 Floor and Sills 2 credits. Students will learn the proper techniques and methods to frame a wood structure. Components of floor and sill framing will be taught as well as materials estimating. F

BCT 203 Interior Wall and Ceiling 2 credits. Students will be taught the vertical and horizontal support members of a structure and their purpose as the basis for further construction. Students will be able to assemble all the framing members of a structure. F

BCT 204 Roof Rafters and Sheathing 3 credits. Various roof framing members and different types of roofs will be identified. Students will learn about different types of roof openings and sheathing. F

BCT 205 Stairways and Special Framing 2 credits. Stairways and other special framing situations will be covered. The types and parts of staircases will be identified. Methods used for measuring rise and run, and materials estimating will be included. F

BCT 206 Field Construction Methods 2 credits. The purpose of this course is to train and provide students with practical experience in powder actuated tools, fastening methods, engineered lumber systems, safe rigging practices, building and electrical codes, and construction safety. Students will apply skills and knowledge to the construction of a modern home. F

BCT 210 Cornices and Gable Ends 2 credits. Types and styles of cornices and gables will be identified including the proper construction of each and the appropriate methods for finishing and covering. The student will learn measuring and estimating for purchase of materials. S

BCT 211 Roofing 2 credits. Roof covering is becoming a specialized area of construction. Types of roofs, appropriate roofing materials and tools needed to complete roof application will be taught. Students will be able to select and apply roofing to a framed structure. S

BCT 212 Exterior Walls and Trim 2 credits. Different types of water and wind wall protection will be covered and installation of siding to a framed structure will be taught. Students will also learn joint finishing and trim techniques to complete exterior walls. F

BCT 213 Exterior Doors and Windows 2 credits. Student will learn types of exterior doors and provide complete installation procedures to include door, frame, hardware, threshold, and weather-stripping. S

BCT 214 Insulation 1 credit. Energy conservation as it relates to types and uses for insulation in a residential structure will be discussed. Students will learn classification, types, and how to figure quantities needed on a project. F

BCT 215 Drywall 2 credits. Drywall sizes, types, and uses of drywall will be covered. Students will learn techniques to install, finish drywall joints and depressions, and learn types of drywall finishes that may be applied. Measuring and estimating will also be taught. S

BCT 216 Interior Doors and Trim 3 credits. Students will learn the types and techniques for installing interior doors. Hardware, moldings, and trim will be taught. The proper installation relating to door frame, wall size and type of room will be covered. S

BCT 217 Flooring 1 credit. Various types of floor covering, underlayment, and wood flooring will be taught. Estimating materials for the size of area to be covered will be discussed. S

BCT 218 Steel Stud Framing 2 credits. The students will demonstrate the correct and safe use of power tools and describe the various uses of steel studs. D

BCT 298 Special Topics 1-16 credits. Addresses the specific needs of individuals, enabling students to upgrade their technical skills through part-time enrollment in units of instruction that are currently available through the program's full-time, pre-employment curriculum. PREREQ: Permission of instructor. D

IDAHO STATE UNIVERSITY Academic Information  Contact: webmaster@isu.edu Revised: March 2012